Overview Of The Most Important Parameters - Wilo -SiFire FIRST Installation And Operating Instructions Manual

en
10.3 Overview of the most important
parameters
M01 – Utilities
Language – Language selection for the texts on
the display
P01.01
Power on clock setup - Activate automatic access
P01.02
to clock setup after power up
Display contrast - Adjusting the contrast of the
P01.03
LCD display
High display backlight intensity
P01.04
Low display backlight intensity
P01.05
Low backlighting transition delay
P01.06
Return to default page - Delay in resetting the
P01.07 default page display. If set to OFF the display al-
ways remains on the last manually selected page
Default page - Default page shown on the display
P01.08
at power on and after the delay.
Motor pump description
P01.09
These parameters are accessible with user level passwords.
M02 – General
Rated motor speed
P02.01
Temperature unit of measurement
P02.02
56
Switchgear of diesel pump
and keys. A bar graph will also be displayed indicating the setting range, the
minimum possible values, the previous value and the default value.
ƒ
Pressing +
+ sets the maximum possible. Pressing
eously returns the setting to the default value.
When entering text, use the
acter and use and
+ simultaneously positions the alphanumeric selection directly on the "A" char-
acter.
ƒ
Press to return to parameter selection. The value entered remains stored.
ƒ
Press STOP to save the changes and exit the settings. The switchgear performs a re-
set and returns to normal operation. If no keys are pressed for 2 consecutive
minutes, the setup menu is automatically exited and the system returns to normal
operation without saving parameters.
You can make a back-up copy to the EEPROM memory, for keyboard editable set-up
data only. These can be restored to the working memory. Backup and restore data com-
mands are available in the command menu.
The controller is programmed and preset at the factory for fully automatic operation.
However, some of the main parameters contained in the respective menus are:
Unit
%
%
%
S
S
Unit
S
sets the value to the minimum possible and pressing
and keys to select the alphanumeric char-
to move the cursor within the text. Pressing
Standard
English
OFF
50
100
25
180
300
Global
FFL
Standard
1.0
°C
+ simultan-
Area
English
Italian
French
Spanish
German
OFF - ON
0-100
0-100
0-50
5-600
OFF/10-600
(pages list)
String 20 char.
Area
0.0-60.0
°C / °F
WILO SE 2020-12