Analysis Tab Page - JDS Uniphase SWS15100 User Manual

Figure 69: Dialog Box to Modify Axis Properties
Selecting Chart Line Styles
Press the Line Styles button in the Process and Display Options tab page to display a dialog
box, shown in Figure 70. This dialog can be used to change the line thickness, the line style, and
color of any trace. Select modifications from those displayed and click the Apply button to view
the changes.
Figure 70: Dialog Box to Modify Trace Properties

Analysis Tab Page

The SWS software provides flexible analysis capabilities. The Analysis tab page is used to
specify the ITU or other channels and the types of analyses to be performed on them. The
results of the analyses are presented in tabular form, with each row corresponding to a physical
channel on the receiver.
Each column is reserved for a particular parameter that is analyzed. The parameters that can be
calculated and presented are:
•
Center wavelength
•
Bandwidth
•
Passband
•
Crosstalk
•
Flatness
•
Maximum and minimum peaks
The parameters can be measured in specified wavelength channels, either ITU or user-defined.
For some parameters, the threshold, or power level at which they are calculated, can be set by
the user. Threshold is required for bandwidth, center wavelength, and passband calculations.
The Analysis area is at the bottom left of the main window, shown in Figure 71, and appears as a
read-only spreadsheet. The software performs basic analysis on the data being viewed in the
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Operating and Maintenance Instructions – 81