Testing The Source Optics Module - JDS Uniphase SWS15100 User Manual

MARKED "LASER INPUT" CLEAN CONNECTOR FIXED? No CALIBRATION CHECK LASER No Yes Yes FIXED? Yes TEST RECEIVER SENDING OUT. ALSO TRY COMPUTER TO SEE WHAT IT IS CONNECT RS232 PORT TO A SOM/LASER WOULD HELP. COULD SOM. TRYING WITH ANOTHER LASER OR THE RS232 PORT ON THE POWER LEVELS MEASURE SOM Yes FIXED SWITCHING THE RS232 CABLE. No

Testing the Source Optics Module

The flowchart in Figure 107 shows the steps to follow when troubleshooting the source optics
module.
Figure 107: Testing the SOM
202 – Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com