Main Menu; Setup Menu - JDS Uniphase SWS15100 User Manual

EXECUTE SAVE
Figure 43: SOM Power-Up Screen

Main Menu

The main menu of the SOM is shown in Figure 44. The menu is used for selecting execution or
setup parameters. The SETUP button is used to go to the Parameter Setup menu. To go to the
menu used to set up the laser for manual operation, press the MANUAL button. The DISPLAY
button is used to display the SOM intrinsic parameters, such as the serial number, the scan
length, and the wavelength calibration constants.
Figure 44: Main Menu of the SOM
The SAVE button is used to save the current operational parameters.

Setup Menu

The parameter setup menu (Figure 45) allows the user to change operational parameters,
including the start and stop wavelengths, the laser power, the scan rate, the delay between
scans, and the polarization mode. To change a parameter, such as the laser power, press the
button beside POWER.
60 – Operating and Maintenance Instructions
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com