User Commands - JDS Uniphase SWS15100 User Manual

Example :STAT:QUES:EVENT?
:STATus:PRESet
Syntax :STATus:PRESet
Function Presets all the enable and transition registers in the questionable and operation
structures to the following settings:
• All bits in the ENABle registers are set to 0
• All bits in the positive transition registers are set to 1
• All bits in the negative transition registers are set to 0
Example :STAT:PRES
:SYSTem:ERRor?
Syntax :SYSTem:ERRor?
Function Returns the error number and an error message from the error queue. See Table
19 for a list of error numbers and their associated messages.
Example :SYST:ERR? returns: 0, "No error"
:SYSTem:VERSion?
Syntax :SYSTem:VERSion?
Function Returns the formatted numeric value the of the SCPI version number
Example :SYST:VERS? returns: 1995.0
:SYSTem:INFOrmation?
Syntax :SYSTem:INFOrmation?
Function Returns the system information for the port specified
Example :SYST:INFO? 1 returns: Module Type, Serial Number, Version Number,
Description

User Commands

The following tables describe SCPI user commands.
[ROUTe]:SCAN?
Syntax :[ROUTe]:SCAN?
Function Returns the available channel list from the source optics module system
Example :ROUT:SCAN?
Response <channel_list>
182 – Programming Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com