Type 3323, 3324, 3325
Possible messages
when M.Q0.TUNE is
Description
aborted
Timeout.
M.Q0.TUNE could not be executed
within the time limit due to an error.
It was not possible
M.Q0.TUNE was unable to determine
to determine the seal
the seal closure point due to an error.
closure point.
Tab. 12: Possible error messages after the M.Q0.TUNE function is
aborted
9.4
Set AUTOMATIC operating state
Set AUTOMATIC operating state:
→ Set DIP switch 4 to AUTOMATIC.
DIP switch
AUTOMATIC operating state:
DIP 4
down
Fig. 25: Set AUTOMATIC operating state
Operation
10
OPERATION
WARNING!
Risk of injury from improper operation.
Improper operation may result in injuries as well as damage to
the device and its surroundings.
▶ The operating personnel must know and understand the
contents of the Operating Instructions.
▶ The safety instructions must be followed and the device
used only as intended.
▶ Only adequately trained personnel are allowed to operate the
system and device.
10.1
Display elements
LED illuminated ring
Mechanical position indicator
Fig. 26: Display elements
english
Open valve
Close valve
33