Set Automatic Operating State; Operation - Burkert 3320 Quick Start Manual

Type 3320, 3321
9.5

Set AUTOMATIC operating state

Set AUTOMATIC operating state:
→ Set DIP switch 4 to AUTOMATIC.
DIP switch
AUTOMATIC operating state:

DIP 4 down
Fig. 21: Set AUTOMATIC operating state

Operation

10 OPERATION
WARNING!
Risk of injury from improper operation.
Improper operation may result in injuries as well as damage to
the device and its surroundings.
▶ The operating personnel must know and understand the
contents of the Operating Instructions.
▶ The safety instructions must be followed and the device
used only as intended.
▶ Only authorised technicians may start up the device or
system.
Different operating elements are available for operating the
device.
• Standard device
Operation is via 2 capacitive buttons and 4 DIP switches.
• Additional operating options
Alternatively, the device can be configured using a PC or
tablet. Settings are created using the büS service interface and
the "Bürkert Communicator" PC software.
It requires the USB-büS-Interface set available as an
accessory.
English
35