Set Automatic Operating State; Operation - Burkert 3320 Series Quick Start Manual

9.5

Set AUTOMATIC operating state

Set AUTOMATIC operating state:
→ Set DIP switch 4 to AUTOMATIC.
DIP switch
Operating state
AUTOMATIC:

DIP 4 down
Fig. 18: Set AUTOMATIC operating state
34
10
WARNING!
Risk of injury from improper operation.
Improper operation may result in injuries as well as damage
to the device and its surroundings.
▶ The operating personnel must know and understand the con-
tents of the Operating Instructions.
▶ The safety instructions must be followed and the device used
only as intended.
▶ Only authorised technicians may start up the device or system.
Different operating elements are available for operating the
device.
• Standard device
Operation is via 2 capacitive buttons and 4 DIP switches.
• Additional operating options
Alternatively, the device can be configured using a PC
or tablet. Settings are created using the büS service interface
and the "Bürkert Communicator" PC software.
It requires the USB-büS interface set available
as an accessory.
English
Type 3320, 3321

Operation

OPERATION