Segway Snarler AT6 S User Manual page 101

load. Do not pull for more than 1 minute, or near to
maximum rated load. If the winch motor gets very
hot, stop winching and let it cool down for a few
minutes.
◆ Always be sure that at least five (5) full turns of
winch cable are wrapped around the winch drum.
◆ Avoid pulling from extreme angles, as this will
cause the winch cable to accumulate at one end
of the drum and damage the cable.
◆ Be aware, that the maximum pulling capacity of the
winch is the maximum pulling capacity on the first
layer only - only the first layer can be pulled in max.
winch capacity. Do not overload the winch.
◆ Never hook the cable back to itself; otherwise the
cable will be damaged. Use trunk protection
protector.
◆ Before operation, make sure that the winch is
firmly fixed to the vehicle or bracket.
◆ Before moving heavy objects, check the winch
cable to prevent kinks and uneven wire layers. The
slacked cable must be properly tightened under a
weight of about 50 kg.
◆ When pulling the load, be sure to lay a blanket or
protective cloth on the cable near the hook end.
This will prevent the possibility of breaking the
wire cable and help prevent serious injuries and
damage.
OPERATION
102