Display Setting - Segway Snarler AT6 S User Manual

VEHICLE DEVICE

Display setting

MODE SELECT
1 2
MODE button
Press "MODE" button: Set LCD display brightness in 5
steps, from dark to bright.
Press "SELECT" button: Change the units (MPH or KPH);
Press and hold "SELECT" key: Reset the single trip
mileage;
Press and hold "MODE" and "SELECT" at the same time:
Clock setting; the hour digit blinks at first, press "SELECT"
to adjust the hours, then press "MODE" to adjust the
minutes, finally press "MODE" key to Save and Exit;
73