Segway Snarler AT6 S User Manual page 45

2 x 4 Mode
When the drive select switch is in 2x4 mode, vehicle is
driven by the rear wheels only. The LCD gauge shows
" " symbol. Select this mode for riding on flat, dry, hard
surfaces, and on the road.
4 x 4 Mode
When the 4-wheel mode is selected on the Drive Select
Switch, power is supplied to the rear wheels and to the front
wheels. " " symbol is displayed on the LCD gauge. The
vehicle will limit maximum speed to 30 km/h. This mode is
suitable for rough terrain, muddy or hilly conditions and
other difficult conditions.
4×4 Lock Mode
When you select Locked 4-wheel drive mode on Drive
Select Switch, the four-wheel drive lock symbol "
displayed on the LCD gauge.
and front wheels and the front differential is locked.
and right front wheels turn at the same speed. Speed is
limited 30 km/h.
troubles.
VEHICLE DEVICE
Power is supplied to the rear
This mode is suitable if you get into
46
" is
Left