Esim; Figure 13. Terminal Configuration - STMicroelectronics B-L462E-CELL1 User Manual

9.2

eSIM

eSIM is the new standard in SIM technology, developed by the GSMA and already widely accepted by the
telecoms market.
eSIM is a smart, rewritable, and multi‑network SIM which is embedded into the module itself and allows to swap
profiles without removing the SIM. An embedded SIM allows, as a result, to store multiple MNO profiles on a
single device.
An embedded SIM (hosted in ST4SIM-200M) is pre-integrated inside LBAD0ZZ1SE. ST4SIM-200M is GSMA
qualified product pre-integrated with Remote SIM Provisioning platform and interoperable with all GSMA qualified
platforms.
The embedded SIM is pre-provisioned with Truphone
cellular connectivity experience. The network coverage can be found on the Truphone
Before using the eSIM for connectivity, the user must activate the SIM data plane as defined by the following
procedure:
Step 1: Retrieve the ICCID of the Truphone
To retrieve ICCID, the user just needs to connect a PC to the CN9 USB ST-LINK connector and launch a terminal
connected to the COM port associated with the USB ST-LINK.
Refer to Section 7.1
The terminal configuration must be the following one:
When the PC is connected to the board and powered ON, the pre‑programmed application displays information
on the board OLED display and generates logs on the terminal console.
UM2743 - Rev 1
®
profile
to set up the USB ST-LINK driver.
Figure 13. Terminal configuration
®
global connectivity profile allowing an out‑of‑the‑box
UM2743
eSIM
®
web portal.
page 33/58