Table of Contents
Advertisement
Installation frame R5 is suitable for:
● Instalaci on solid wall/ceiling construction
● Installation on gypsum wall construction
● Instalaci outside solid ceiling constructions with concrete
On the inside is installation frame equipped by intumescent sealing. It enlarges its capacity and air
proofs the gap between installation frame and damper body.
● Gypsum wall construction has to be installed according manufacture requirements.
● Installation frame:
● Fasteners:
+3
● d = (D + 10
mm)
+3
● d = (D + 100
mm) installation with concrete
≥ 100
cement lime plates and galvanized plate
galvanized plate
max. 750
150*
1
2
3
4
77
≥ 100
150*
max. 100
* min. 110 - Concrete/ min. 125 - Aerated concrete
POSITION:
Fire damper FDMA PM with installation frame R5
Fitting with threaded rods or steel bracket
Concrete B20
Rebar
Installation opening has to be
reinforced by profile (UW, CW).
Profil is fixed by screws ≥3,5 mm
with corresponding length. Distance
between screws ≤200 mm.
Advertisement
Table of Contents
