Reference Manual
00809-0100-4108, Rev BA
Re-mapping using a field communicator
From the HOME screen, enter the Fast Key sequence
Fast Keys
Re-mapping using AMS Device Manager
1.
Right click on the device and select Configure.
2. Select Manual Setup and click on the HART tab.
3. Assign Primary, secondary, tertiary, and quaternary variables under Variable Mapping.
4. Click Send.
5. Carefully read the warning and click Yes if it is safe to apply the changes.
Re-mapping using local operator interface
Refer to
Interface.
Figure 2-13. Re-mapping with local operator interface
Configuration
2, 1, 1, 3
Figure 2-13
for instructions to remap the primary variable using a Local Operator
VIEW CONFIG
ZERO TRIM
UNITS
RERANGE
LOOP TEST
DISPLAY
EXTENDED MENU
EXIT MENU
Section 2: Configuration
EXTENDED MENU
CALIBRAT
DAMPING
TRANSFER FUNCT
SCALED VARIAB
ASSIGN PV
TAG
ALARM SAT VALUES
PASSWORD
SIMULATE
HART REV
BACK TO MENU
EXIT MENU
March 2014
23