Huawei SmartLogger3000 User Manual page 92

SmartLogger3000
User Manual
Parameter
Built-in MBUS
Device disconnection time

Figure 6-16 Setting access parameters for an external MBUS
Parameter
Device type
Port number
Step 2 Set networking parameters.
Issue 03 (2020-01-10)
Set access parameters for an external MBUS.
− Method 1: Click Auto. Search to connect the MBUS.
Method 2: Click Add Devices, set access parameters, and click Add Devices.
−
Copyright © Huawei Technologies Co., Ltd.
Description
 If the SmartLogger communicates with the solar inverter
using a built-in MBUS, set this parameter to Enable.

If only RS485 communication is used between the
SmartLogger and the solar inverter and third-party device,
set this parameter to Disable.
Specifies the duration for determining device disconnection.
Description
Set this parameter to MBUS.
Set this parameter to the serial number of the COM port
connected to the MBUS.
6 WebUI Operations
84