Huawei SmartLogger3000 User Manual page 27

SmartLogger3000
User Manual
Appearance
Button
Button
RST button
Dimensions
Figure 2-8 Dimensions
Issue 03 (2020-01-10)
Output Power Port
12 V output
power port
Operation
Hold down the
button for 1s to
3s.
Hold down the
button for more
than 60s.
Copyright © Huawei Technologies Co., Ltd.
Description
GND Power supply–
12V Power supply+
Function Description
When WLAN is set to OFF in idle state, hold down
the RST button for 1s to 3s to power on the WLAN
module. The alarm/maintenance indicator (ALM)
then blinks green quickly for 2 minutes (other
indicators are off) and the SmartLogger waits for
connecting to the app. If the app is not connected, the
WLAN module is automatically powered off after it
is powered on for 4 hours.
Within 3 minutes after the SmartLogger is powered
on, hold down the RST button for more than 60s to
restart the SmartLogger and restore factory settings.
2 Product Overview
19