Huawei SmartLogger3000 User Manual page 125

SmartLogger3000
User Manual
Procedure
Step 1 Configure a protocol information point file in .cfg format and import the file to the
SmartLogger.
Figure 6-39 Importing configuration
Step 2 Set access parameters and click Add Devices.
Figure 6-40 Setting access parameters
Parameter
Device Type
IP address
Common address
Address
Step 3 Set device monitoring parameters and click Submit.
Issue 03 (2020-01-10)
Description
The value can be IEC104 Device 1 to IEC104 Device 5.
Select a value based on the imported configuration file. For
example, if iec104_equip_custom_1.cfg is imported, select
IEC104 Device 1.
Set this parameter to the IP address of the IEC104 device.
Set this parameter to the common address of the IEC104
device.
Set this parameter to the communications address of the
IEC104 device.
Copyright © Huawei Technologies Co., Ltd.
6 WebUI Operations
117