Huawei SmartLogger3000 User Manual page 78

SmartLogger3000
User Manual
Step 3 Set LAN parameters.

If the SmartLogger is connected to a local area network (LAN) and a proxy server has
been set, you need to cancel the proxy server settings.

If the SmartLogger is connected to the Internet and the PC is connected to the LAN, do not
cancel the proxy server settings.
1.
2.
3.
4.
5.
Step 4 Log in to the SmartLogger WebUI.
1.
Issue 03 (2020-01-10)
 It is recommended that the PC be connected to the LAN port of the SmartLogger or the GE port of
the SmartModule. When the PC is connected to the GE port of the SmartModule, adjust the network
configuration of the PC to the configuration mode when the PC is connected to the LAN port of the
SmartLogger.
Open Internet Explorer.
Choose Tools > Internet Options.
Click the Connections tab and then click LAN settings.
Clear Use a proxy server for your LAN.
Figure 6-2 LAN settings
Click OK.
In the address box of a browser, enter https://XX.XX.XX.XX (XX.XX.XX.XX is the IP
address of the SmartLogger) and press Enter. The login page is displayed.If you log in to
the WebUI for the first time, a security risk warning is displayed. Click Continue to this
website to log in to the WebUI.
 It is recommended that users use their own certificates. If the certificate is not replaced, the security
risk warning will be displayed during each login.
Copyright © Huawei Technologies Co., Ltd.
6 WebUI Operations
70