Huawei SmartLogger3000 User Manual page 31

SmartLogger3000
User Manual
Indicator
Alarm/Mainten
ance indicator
(ALM)
Communications Ports

Appearance

Appearance
Issue 03 (2020-01-10)
Status
Alarm status
GE ports: four Ethernet electrical ports. Connect the LAN port of the SmartLogger to
one GE port of the SmartModule using an Ethernet cable. The SmartModule obtains an
IP address from the DHCP server and automatically registers with the SmartLogger. The
SmartLogger can use all communications ports of the SmartModule.
GE Port
Pins
Indicators
DI ports: digital input ports, which are used to connect to DI power grid scheduling
commands or alarm signals.
DI Port
DI1
Copyright © Huawei Technologies Co., Ltd.
Description
Red off No alarm is raised for the
SmartModule.
Blinking red The SmartModule is running in
slowly (on for non-encryption status.
1s and then off
for 4s)
Blinking red The SmartModule digital
fast (on for 0.5s certificate is invalid.
and then off for
0.5s)
Steady red Reserved.
Description
Pin 1 GE1+
Pin 2 GE1–
Pin 3 GE2+
Pin 4 GE3+
Pin 5 GE3–
Pin 6 GE2–
Pin 7 GE4+
Pin 8 GE4–
Green indicator If the indicator is steady green, the
line is normal.
Yellow If the indicator blinks yellow, data
indicator communication is normal.
Description
Can connect to four passive dry
1
contact signals.
12V
2 Product Overview
23