Huawei SmartLogger3000 User Manual page 119

SmartLogger3000
User Manual
Parameter
Port number
Address
Step 2 Set device monitoring parameters and click Submit.
Figure 6-31 Device monitoring
Tab
Teleindication
Telemetering
Telecontrol
Performance Data
Running Param.
About
Step 3 Choose Settings > Other Parameters and set STS overtemperature protection as required.
----End
Issue 03 (2020-01-10)
Description
Set this parameter to the number of the COM port connected
to the STS.
Set this parameter to the communications address of the STS.
Function
Views the status parameters of
the device, such as the
switched-on or switched-off
state.
Views the real-time data of the
device, such as the voltage.
Sets status control parameters,
such as the parameter for
controlling switch-on or
switch-off.
Views or exports the
performance data of the device.
Sets the standby signals for
teleindication, telemetering, and
teleadjust.
Queries communication
information.
Copyright © Huawei Technologies Co., Ltd.
6 WebUI Operations
Description
N/A
N/A
Set this parameter as required.
N/A
Set this parameter as required.
N/A
111