Huawei SmartLogger3000 User Manual page 44

SmartLogger3000
User Manual
Flat Surface-mounted Installation
Install the power adapter on a flat surface. This section describes how to install the power
adapter on the top of the SmartLogger.
Step 1 Place the power adapter horizontally on the top of the SmartLogger.
Ensure that the power adapter indicator faces upward or outward.
Step 2 Plan the cable route of the power adapter to ensure that the SIM card can be installed
properly.
Figure 3-11 Flat surface-mounted installation
----End
Issue 03 (2020-01-10) Copyright © Huawei Technologies Co., Ltd.
3 Device Installation
36