Huawei SmartLogger3000 User Manual page 111

SmartLogger3000
User Manual
Figure 6-22 Setting access parameters
Parameter
Device Type
Comm. Protocol
Port number
Address
Table ID
Step 2 Set running parameters and click Submit.
Figure 6-23 Setting running parameters
Parameter
Protocol version
Number of lead bytes
Voltage change ratio
Issue 03 (2020-01-10)
Description
Set this parameter to Power Meter.
Set this parameter to DL/T645.
Set this parameter to the serial number of the COM port
connected to the power meter.
Set this parameter to the communication address of the power
meter.
Set this parameter to the meter ID.
Description
Select DL/T645-2007 or DL/T645-1997 based on the
protocol version of the power meter.
Retain the default value unless otherwise specified.

Set this parameter to 1 when the power meter uploads a
Copyright © Huawei Technologies Co., Ltd.
6 WebUI Operations
103