Huawei SmartLogger3000 User Manual page 82

SmartLogger3000
User Manual
Parameter
DST enable
Date
Time
Clock source


Plant
Parameter
Plant name
Plant address
Plant owner
Plant owner address
Country/Region
Revenue
Parameter
Currency
Electricity price/kWh
Issue 03 (2020-01-10)
After the date and time are set, the date and time of all the inverters connected to the
SmartLogger are updated accordingly. Ensure that the settings are correct.
Changing the date and time affects the recording of system energy yield and performance
data. Do not change the time zone or system time unless necessary.
Copyright © Huawei Technologies Co., Ltd.
Description
Set this parameter as required.
NOTE
This parameter is unavailable for zones without
DST.
Set this parameter to the local date.
Set this parameter to the local time.
Set this parameter as required.
The value can be NTP, Management
System, IEC104, or Modbus TCP. If there
is no management system, ignore the
corresponding setting.
Description
Set this parameter as required.
NOTE
In the English half-width status, you cannot enter
any of the following characters:
<>:,`'?()#&\$|%+;~^"
Select a country/region based on the region
where the PV plant is located.
Description
Set this parameter as required.
The value can be EUR, GBP, USD, CNY,
or JPY.
Set this parameter to the local electricity
price, which is used to calculate the
converted revenue of the energy yield.
6 WebUI Operations
74