Huawei SmartLogger3000 User Manual page 164

SmartLogger3000
User Manual
Figure 8-3 Setting FTP parameters
Parameter
FTP server
User name
Password
Remote directory
Data export
File format
File name
Time format
Export mode
Issue 03 (2020-01-10)
Description
Set this parameter to the domain name or IP address of the
FTP server.
Set this parameter to the user name for logging in to the FTP
server.
Set this parameter to the password for logging in to the FTP
server.
After you set this parameter, a subdirectory of the same name
is created in the default data upload directory (specified by
the FTP server).
Specifies whether data can be reported.
Format 1, Format 2, Format 3, and Format 4 are
supported.
NOTE
Format 2 has two more information points than Format 1: E-Day
(current-day energy yield) and E-Total (total energy yield). Format 3
has more information points than Format 1 and Format 2: power
meter, PID module, user-defined device, and SmartLogger data.
Format 4 has more information points than Format 3: active and
reactive power of power meters.
Set this parameter to the format of the file name.
Set this parameter to the time format.
The value can be Cyclic or Fixed time.
 Cyclic: Periodically reports data. Export interval
specifies the period for reporting data. File mode specifies
whether all data or only the incremental data of a day is
reported each time.
 Fixed time: Reports data at a specified time. Fixed time
specifies the time for reporting data.
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
156