Huawei SmartLogger3000 User Manual page 166

SmartLogger3000
User Manual
Procedure
Step 1 Set email parameters and click Submit.
Figure 8-4 Setting email parameters
Parameter
SMTP server
Encryption mode
SMTP port
User name
Password
Email language
Send address
Receive address N
NOTE
Yield
Alarms
Issue 03 (2020-01-10)
N is 1, 2, 3, 4, or 5.
Copyright © Huawei Technologies Co., Ltd.
Description
Set this parameter to the domain name or IP address of the
SMTP server.
Set this parameter to the email encryption mode.
Set this parameter to the email sending port.
Set this parameter to the user name for logging in to the
SMTP server.
Set this parameter to the password for logging in to the SMTP
server.
Set this parameter to the language for sending emails.
Set this parameter to the email address for sending emails.
Set this parameter to the email address for receiving emails.
Specifies whether to send energy yield data by email and the
time for sending emails.
Specifies whether to send alarms by email and the severity of
the alarms to be sent.
8 FAQ
158