Exit Menu; Bios Compatibility - Xycom AHIP-370 Manual

AHIP-370 Manual

Exit Menu

PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main Advanced
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
↑↓
F1 Help
←→ Select Menu
ESC Exit
This menu serves as the exit point for the setup menus. You can save the current
configuration, restore the previous configuration, or load the default configuration.
Saved items are stored in battery backed CMOS RAM. The next time you boot your
computer, the BIOS configures your system according to the setup selections stored
in CMOS. If those values cause the system boot to fail, reboot and press
setup. In setup, you can get the default values (as described below) or try to change
the selections that caused the boot to fail.
Option
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes

BIOS Compatibility

This BIOS is IBM PC/AT compatible with additional CMOS RAM and
BIOS data areas used.
40
Security
Select Item -/+
Enter Select » Submenu
Figure 3-13. Exit Menu
Table 3-12. Exit Menu Options
Description
Use this option to save the current configuration and exit.
Use this option to exit Setup without storing any new selections you may have
made in CMOS. The selections previously in effect remain in effect. If you have
changed some items, the program asks if you want to save before exiting.
Use this option to load the default values for all setup items. You can return to the
other menus if you want to review and change your selections. The default values
are not in effect until the configuration is saved.
Use this option to discard all changes since the configuration last changed (i.e., this
option loads previous configuration). You can return to the other menus if you want
to review and change your selections. The default values are not in effect until the
configuration is saved.
Use this option to save all the selections without exiting Setup. You can return to
the other menus if you want to review and change your selections.
Power Exit
Item Specific Help
If the item you
are viewing has
specific help, it will
be listed here.
Change Values F9 Setup Defaults
F10 Previous Values
to enter
F2