Bios Main Setup Menu - Xycom AHIP-370 Manual

AHIP-370 Manual

BIOS Main Setup Menu

You start the BIOS Setup utility as your system boots up. To access the
main menu, press
loads the operating system. If the Boot Time Diagnostic Screen (in the
Advanced Menu) is enabled on your system, the BIOS will display the
following message: "Press F2 to enter Setup."
Main Advanced
System Time:
System Date:
Diskette A:
Diskette B:
?IDE Primary Master:
?IDE Primary Slave:
?IDE Secondary Master:
?IDE Secondary Slave:
System Memory:
Extended Memory:
?Cache RAM
↑↓
F1 Help
←→ Select Menu
ESC Exit
Option
System Time (HH/MM/SS)
System Date (MM:DD:YYYY)
Diskette A or B
28
after the memory tests and before your system
F2
Xycom BIOS Setup Utility
Security
[16:19:20]
[10/27/98]
[1.44 MB, 3½" ]
[Disabled]
(1082 MB)
(CD-ROM)
[None]
[None]
640 KB
31744 KB
[512 KB]
*
Select Item -/+
Enter Select » Submenu
Figure 3-1. Main Setup Menu
Table 3-1. Main Setup Menu Options
Description
Sets the real-time clock for hour, minute, and seconds. The hour is calculated
according to a 24-hour military clock (i.e., 00:00:00 through 23:59:59). Use
move right; +
SHIFT
one field to the next. The numeric keys, 0-9, are used to change the field values.
It is not necessary to enter the seconds or type zeros in front of numbers.
Sets the real-time clock for the month, day, and year. Use
+ to move left. The
SHIFT TAB
the next. The numeric keys, 0-9, are used to change the field values. It is not
necessary to type zeros in front of numbers.
Selects the floppy disk drive installed in your system.
Power Boot
Change Values
to move left. The
TAB ENTER
key may be used to move from one field to
ENTER
Exit
Item Specific Help
If the line item you
are viewing has
specific help, it will
be listed here.
F9 Setup Defaults
F10 Save and Exit
key may be used to move from
to move right;
TAB
to
TAB