Security Menu - Xycom AHIP-370 Manual

AHIP-370 Manual

Security Menu

PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main Advanced
Supervisor Password is:
User Password is:
Set Supervisor Password:
Set User Password:
Password on boot:
Fixed disk boot sector:
Diskette access:
User Mode:
Virus check reminder:
System backup reminder:
↑↓
F1 Help
←→ Select Menu
ESC Exit
Use this menu to define system passwords and set other security options.
If you change the supervisor or user password, you must enter the pass-
word a second time for verification. Passwords can prevent access to
setup menus or unauthorized booting of the unit. If you use the supervi-
sor password, you can also change the user password.
Option
Supervisor Password
User Password
Set Supervisor Password
Set User Password
Password on Boot
Fixed Disk Boot Sector
36
Security
Clear
Clear
[Enter]
[Enter]
[Disabled]
[Normal]
[Supervisor]
[Normal]
[Disabled]
[Disabled]
Select Item -/+
Enter Select » Submenu
Figure 3-9. Security Menu
Table 3-9. Security Menu Options
Description
Displays status of supervisor password. The supervisor pass-
word provides full access to setup menus.
Displays status of user password. The user password pro-
vides limited access to setup menus. The User Mode field
(see below) defines access.
Enter the new password twice to set it. You may use up to eight
alphanumeric characters. You can set the password to nothing
by hitting a carriage return.
Enter the new password twice to set it. You may use up to eight
alphanumeric characters. You can set the password to nothing
by hitting a carriage return.
If the supervisor password is set and this option is disabled,
BIOS assumes the user is booting.
Write protects the disk boot sector to help prevent viruses.
Power Exit
Item Specific Help
If the item you
are viewing has
specific help, it will
be listed here.
Change Values F9 Setup Defaults
F10 Previous Values