Getting Started; What's In The Box; Getting It Out Of The Box; Powering Up - Blizzard Lighting mikrokassette Manual

1. GETTING STARTED

What's In The Box?

• 1 x Mikrokassette™ Fixture
• 1 x IEC Power Cord
• Mounting Brackets & Locking Knobs

Getting It Out Of the Box

Congratulations on purchasing the fun-sized mikrokassette™, RGBW LED wash
fixture. Now that you've got mikrokassette™, you should carefully unpack the
box and check the contents to ensure that all parts are present and in good
condition. If anything looks as if it has been damaged in transit, notify the
shipper immediately and keep the packing material for inspection. Again,
please save the carton and all packing materials. If a fixture must be returned
to the factory, it is important that the fixture be returned in the original factory
box and packing.

Powering Up!

All fixtures must be powered directly off a switched circuit and cannot be run
off a rheostat (variable resistor) or dimmer circuit, even if the rheostat
or dimmer channel is used solely for a 0% to 100% switch.
Warning! All fixtures must be connected to circuits with a suitable
Ground (Earthing).

Getting A Hold Of Us

If something goes wrong, please visit www.blizzardpro.com/support
and open a support ticket. We'll be happy to help, honest.
Disclaimer: The information and specifications contained in this document are
subject to change without notice. Blizzard Lighting™ assumes no responsibility
or liability for any errors or omissions that may appear in this user manual.
Blizzard Lighting™ reserves the right to update the existing document or to
create a new document to correct any errors or omissions at any time. You can
download the latest version of this document from www.blizzardpro.com.
Author:
J. Thomas
Mikrokassette™ Manual - Rev. A
Date:
9/25/2020
Page 3
Last Edited:
J. Thomas
Date:
12/28/2020
© 2020 Blizzard Lighting, LLC