YASKAWA Motoman NXC100 Manual page 15

• Before operating the manipulator, check that servo power is turned OFF
when the emergency stop buttons on the front face of the NXC100 and
on the right side of the programming pendant are pressed.
When the servo power is turned OFF, the SERVO ON LED on the program-
ming pendant is turned OFF.
Injury or damage to machinery may result if the emergency stop circuit cannot stop the
manipulator during an emergency. The manipulator should not be used if the emergency
stop buttons do not function.
• Once the emergency stop button is released, clear the cell of all items
which could interfere with the operation of the manipulator.
Then turn the servo power ON.
Injury may result from unintentional or unexpected manipulator motion.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
WARNING
Emergency Stop Button
Release of Emergency Stop
iv
HW0482738
TURN
HW0482738
4/48