Deif SGC 420 User Manual page 28

Table 6.13 S1 Sensor (AUX S1 RES / DIG M)
Level 2
Use Input As
(SENSOR SELECTION)
(Digital) Source
((DIG) SOURCE)
Name
(NAME)
(Digital) Polarity
((DIG) POLARITY)
(Digital) Action
((DIG) ACTION)
(Digital) Activation
((DIG) ACTIVATION)
(Digital) Activation Delay
((DIG) ACTIVATION DELAY)
(S1) Shutdown
(SHUTDOWN)
(S1) Shutdown Threshold
(SHUTDOWN THRESHOLD)
(S1) Warning
(WARNING)
(S1) Warning Threshold
(WARNING THRESHOLD)
(S1) Threshold Type
(THRESHOLD TYPE)
(S1) Circuit Fault Action
(OPEN CKT ALARM)
(S1) Calibration Table
(STS) High Temp Threshold
(SHELT TEMP THRESH)
(STS) Shelter Temp Hysteresis
(SHELT TEMP HYST)
(STS) Shelt Temp Monitoring Delay
(SHELT TEMP DELAY)
(STS) Shelt Temp Run Duration
(GEN RUN DURATION)
(STS) Calibration Table (Resistive)
USER MANUAL 4189341227A UK
Range
Not used
Digital Input M
S1 Sensor
Shelter Temperature Sensor
See Digital input source selection in this document
Auxiliary Input M
Close to Activate
Open to Activate
None
Notification
Warning
Electrical Trip
Shutdown
Never
From Engine Start
From Monitoring On
Always
1 to 180 s
Enable
Disable
0.0 to 1000.0
Enable
Disable
0.0 to 1000.0
Greater Than Threshold
Less Than Threshold
None
Notification
Warning
Electrical Trip
Shutdown
Resistance: 0 to 5000 Ω
Value: 0 to 1000
25 to 300 °C
1 to 100 °C
5 to 300 s
1 to 720 min.
Resistance: 0 to 5000 Ω
Temperature: -25 to 300 °C
Page 28 of 86