Table of Contents
Advertisement
Hardware Installation
Connecting the FBC
Telephone wall plug
PABX
To
Exchange
Line
Warning:
10 - Fax Business Controller
Horizontal Mounting
Apply the four rubber feet to the areas indicated in the illustration below. Place the unit
on a flat surface.
Back Panel
Rubber
feet
Rubber
feet
Connecting the FBC Directly to the Exchange Line
•
Using the supplied cables, connect the FBC connector marked "LINE" to the wall
outlet.
•
Connect the connector marked FAX to the FAX machine.
•
Plug the right angle connector from the power supply to the Power input on the
FBC.
•
The unit is now ready to power up.
FBC
Note that the FBC only uses the "A" and "B" wires for a single connection to the exchange
line.
Connecting the FBC through a PABX
•
Using the supplied cables, connect the FBC connector marked "FAX" to the FAX
machine.
•
Connect the connector marked "Line" to the telephone wall plug.
•
Plug the right angle connector from the power supply to the Power input on the
FBC.
•
The unit is now ready to power up.
Telephone wall plug
Do not attempt to connect the FBC during FAX transmissions.
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations.
Use caution when installing or modifying telephone lines.
Rubber
feet
FBC
Rubber
feet
FAX Machine
To AC receptacle
FBC
FBC
FBC
Fax Business Controller
FAX Machine
To AC receptacle
8380-377-115-NQ
Issue 1, January 1997
Advertisement
Table of Contents
