Use Automatic Programmes - Hanseatic 6467 5200 User Manual

Use automatic programmes

NOTICE
Risk of damage to property!
Improper handling of the appliance
can lead to property damage.
Do not use the baking tray in the au-
■
tomatic programmes d01, d02, d03,
A01 and A02.
Preparation:
• Remove the entire packaging and weigh
the food – the weight is needed to ensure
the correct settings.
(1)
(13)
1. First, tap on the sensor (13) to exit other
functions.
(6)
2. To select the automatic mode, tap the
sensor (6) until the display (1) shows
the desired programme.
Use automatic programmes
3. Programmes with weight setting: Tap the
The weight indicator will be lighted con-
stantly.
The appliance automatically adjusts the
cooking time.
4. Programmes
– without preheating:
– with preheating ( ):
(1)
(4) (2)
5. The programme run is complete when
you hear five signal tones and the display
shows End. Remove the food.
sensor (4).
• Place the food in the cooking com-
partment and close the door.
• To start the programme, tap the
sensor (2).
The lighting will switch on and the oven
will heat up.
The cooking time indicator will count
down.
• Tap the sensor (2) to start the pro-
gramme.
The lighting will switch on; the oven will
heat up. On the display, the preheating
symbol will light up. When preheat-
ing is complete, the symbol goes out.
You will hear five signal tones.
• Place the food in the cooking com-
partment and close the door.
• Tap the sensor (2) to continue the
programme.
The cooking time indicator will count
down.
Page EN-25