Electronic Module Led Indicators - Pentair F783E Operating Manual

For installa on in Ex. situa on: refer to special condi ons in Sec on 5 of this manual. Use only Ex. cer fied product

13.5.3. Electronic module LED indicators

Input/ output indicators:
The DeviceNET module has three large LED indicator on the front. From leF to right:
There are 3 indica)on modes for the module LEDs:
Steady,
Flash (approx. 0.5 sec on, 0.5 sec off),
Twink (¼ sec on, ¼sec off, ¼sec on, ¾sec off)
LED Indicator LED Indicator Condition
Left LED Steady RED
" Flashing RED
" Twink RED
Center LED Steady GREEN
" Flashing GREEN
" Twink GREEN
Right LED Flashing AMBER
" Steady AMBER
" Flashing RED
" Steady RED
" Flashing RED-AMBER-OFF
Fig 22: Electronic module LED indicators D-NET
Pg 44
F783E / F783E 2.0
Description
CLOSED indication switch made
Output 1 de-energised, but Closed switch not made
Output 1 de-energised, and FTC* timer timed out, input not made
OPEN indication switch made
Output 1 energised, but Open input not made
Output 1 energised, and FTO* timer timed out, input not made
Device On-line but not being communicated with
Device On-line and communicating
Device senses Bus voltage low
Device Bus-Off or Major Internal Fault
Node Beacon function
Open switch
Closed switch
indicator
Network/Module
Indicator
Indicator
00-ISN-191_Rev C
20/01/2018