Authorised Use; Export Restric)Ons - Pentair F783E Operating Manual

F783E / F783E 2.0
2.

AUTHORISED USE

Incorrect use of the control head F783 Easymind 2.0 may be dangerous to people, nearby equipment and the
environment.
The control head has been designed for use as actua)on of pneuma)cally operated valves and / or for recording the switching
states of these.
The authorised data, the opera)ng condi)ons and condi)ons of use specified in the contract documents and opera)ng
instruc)ons are to be observed during use. These are described in Chapter "6. Technical Data".
In view of the large number of applica)on op)ons, check and, if required, test prior to installa)on whether the control head is
suitable for the specific applica)on case.
If you are unsure, please contact your Pentair Flow TechnologiesPacific Pty. Ltd contact.
The device may be used only in connec)on with third-party devices and components which have been recommended or
approved by Pentair Pentair Flow TechnologiesPacific Pty. Ltd.
Any unauthorized reconstruc)ons and changes to the control head are prohibited for safety reasons.
Correct transporta)on, correct storage and installa)on as well as careful opera)on and maintenance are essen)al for reliable
and problem-free opera)on.
For connec)ng the control head, use line installa)ons that do not cause any mechanical stresses.
Use the device only as intended.
2.1 Export Restric ons
If expor)ng the system/device, observe any exis)ng restric)ons.
00-ISN-191_Rev C
Pg 7
20/01/2018