Pentair F783E Operating Manual page 42

For installa on in Ex. situa on: refer to special condi ons in Sec on 5 of this manual. Use only Ex. cer fied product
Power consump on at 24V (mA):
D_NET Power
3-wire Induc)ve Proximity switch, PNP. Connected to 3-pin headers with latching plugs.
Posi on sensors:
Up to 3 outputs are able to be controlled from a single module. These have a common 24VDC power supply and
Outputs:
ground. These outputs are mapped to bits 0, 1, and 2 of the first output byte
Two posi)on switch feedback signals are available. These inputs are mapped to bits 0 and 1 of the first input byte
Inputs:
CONN#1 Core
6-WAY PLUG Colour
1 Black
2 Blue
3 Clear
4 White
5 Red
6 N/C
Fig 20: Internal electrical connec on DeviceNET
NOTE!
The Producer/Consumer model
•
The F783E control module can be considered as having both Inputs and Outputs in both direc)ons, that is both
upstream and downstream from the module. To reduce confusion this document refers to the producer/consumer
model for informa)on transfer. In this model the F783E Module CONSUMES data from the control system or network
(i.e., controls the solenoid) and PRODUCES data for the control system (sends the state of the posi)on switches back to
the control system).
•
In this respect the control of the solenoid is considered as an Output and the feedback from the switches is considered
an Input. The connec)ons between the control system and the module are agnos)c, and ignored.
Pg 42
1 switch ON
34
Func)on CONN#2 & 3
3-WAY PLUG
0V
DATA Lo
Screen
DATA Hi
+24V DC
-
F783E / F783E 2.0
1 switch ON +
Solenoid energised
44
24VDC
4-WAY PLUG
PNP
1 0V
2 +24V
3 Feedback
CONN#4
1 Solenoid 2 control
2 Solenoid common supply
3 Solenoid 1 control
4 Solenoid 3 control
00-ISN-191_Rev C
20/01/2018