Table of Contents
Advertisement
4.5
Speed variation
Switch off the machine by
using the main switch.
Open the protective cover.
Loosen the lever of the V-
belt tensioning.
Position the V-belt respec-
tively on the required trans-
mission stage.
Tighten the clamping lever again and thus tighten the belt drive.
Close the protective cover.
4.6
Drill depth stop
Use the drilling depth stop
when drilling several holes
of the same depth.
Loosen the locking
screw and turn the
graduated collar until
the required drilling
depth matches with
the indicator.
Re-tighten the locking
screw.
Operation
Version 2.0.1 - 2020-7-17
V-belt
Lever
V-belt tension
TENSIONED
RELEASED
Abb.4-2:
Lever V-belt tensioning
Locking screw
Drill depth stop
Scale
Abb.4-3:
Drill depth stop
Translation of the original instructions
B16H
GB
25
Advertisement
Table of Contents
