Table of Contents
Advertisement
4.6.1
Table height adjustment
Release the clamping lever
on the drilling table.
Use the hand crank to move
the drilling table to the
desired height.
Retighten the clamping lever
firmly.
4.7
Disassembly, assembly of drill chucks and drill bits
4.7.1
Fitting the drill chuck
The drill chuck or the tool
is secured in the drill
spindle
against
turning
over by means of a form-
locking connection (driver).
A
frictionally
engaged
connection keeps and cen-
tres the drill chuck or the
drill in the drill spindle.
Check or clean the conical seat in the drill spindle and on the taper mandrel of the tool or of
the quick-action drill chuck.
Press the taper mandrel into the drill spindle.
GB
B16H
26
Clamping lever
Crank handle
Abb.4-4:
Table height adjustment
Drill sleeve
Driver
Taper mandrel
Abb.4-5:
Taper mandrel
Translation of the original instructions
Operation
Version 2.0.1 - 2020-7-17
Advertisement
Table of Contents
