Product Settings With Keypad And Display - Husqvarna AUTOMOWER 310 Operator's Manual

3. Follow the instructions in the Automower
app.
3.11.3 To pair Automower
Connect@Home and the product
®
Automower Connect@Home function with Bluetooth
communication is included in Automower
means that the mobile device can communicate with the
product while you are in Bluetooth
range.
1. Do steps 1–3 in To get access to the menu in the
display of the product on page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Connect@Home > Pairing > New pairing .
3. Follow the instructions in the Automower
app.
3.12 Product settings with keypad and
display
3.12.1 To get access to the menu in the
display of the product
1. Push the STOP button.
2. Use the number buttons and the OK button to
enter the PIN code.
3. Push the MENU button.
3.12.2 Menu structure
The main menu contains:
Schedule
•
Security
•
Messages
•
• Weather timer (Automower
Installation
•
Settings
•
Accessories
•
Menu structure overview - 1 on page 7 and
Refer to
Menu structure overview - 2 on page 8 .
3.12.3 Schedule
Note:
The lawn should not be cut too often to obtain
the best result. If the product is allowed to operate too
much, the lawn may appear flattened. The product is
also subjected to unnecessary wear.
1440 - 004 - 24.03.2021
®
Connect 3.12.3.1 To set the schedule
1.
®
2.
®
3.
®
310/315. This
4.
®
communication
5.
6.
Accessories >
7.
®
Connect
8.
3.12.3.2 Make an estimate of the necessary operating
time
If the work area is less than maximum product capacity,
the schedule must be set to decrease the wear on the
lawn and the product. The product has a maximum
cutting time each day. You can set the operating time of
the product in the schedule. The operating time includes
cutting, searching and charging. The operating time can
be different because of many reasons, for example the
layout of the work area, the grass growth and age of the
®
315/315X)
battery. When the product has operated to the maximum
cutting time in a day, the message
complete is shown in the display of the product.
The recommended operating times for some work area
examples are shown in the table below. If the result is
not satisfactory, increase the operating time.
Do steps 1–3 in To get access to the menu in the
display of the product on page 23 .
Use the arrow buttons and the OK button to move
through the menu structure
Use the arrow buttons and the OK button to select
the day.
Use the right arrow button to select the period.
Push the OK button.
Calculate the suitable operating hours. Refer to
Make an estimate of the necessary operating time
on page 23 .
Enter the time with the number buttons. The
product can cut the grass 1 or 2 periods each day.
If the product must not cut grass on a specified
day, unselect the box adjacent to the 2 time
periods.
2
310 Area, m
500
1000
2
315/315X Area, m
500
1000
1500
Schedule > Overview .
Today's mowing
Recommended op-
erating time, h
7-8
15-16
Recommended op-
erating time, h
6-7
14-15
21-22
Installation - 23