Product Settings; Automower ® Connect App; Product Settings With Keypad And Display - Husqvarna AUTOMOWER 450XH Operator's Manual

Note:
Make a note of the PIN code. Refer to
Introduction on page 3 .
3.9.3 Calibration
The calibration process is automatic. After the basic
settings are done, the product moves away from the
charging station and stops, while it calibrates some of
the product settings. When the calibration is complete,
the product starts to mow.

3.10 Product settings

You can use the keypad and the display on the product
®
or the Automower Connect app to do the settings for
the functions of the product. The functions of the product
have factory settings that are applicable for almost all
work areas, but the settings can be adapted to the
conditions for each work area.
®
3.11 Automower Connect app
The product can connect to mobile devices that have
®
the Automower Connect app installed. Automower
Connect is a free app for your mobile device. You
can use the extended functions for the product in the
Automower ® Connect app.
Dashboard shows the current operation of the
• The
product. You can select an operating mode for the
product in the dashboard.
Map shows the current position of the product
• The
and the set center point for the GeoFence function.
• In the Settings menu you can set the settings for
the product.
Statistics menu you can see the statistics of
• In the
the product.
• In the Messages menu you can find the Fault
messages and the Information messages of the
product.
®
The Automower Connect app has Long-range cellular
connectivity and Short-range Bluetooth
22 - Installation
3.11.1 To install the Automower
app
1. Download the Automower
mobile device.
2. Sign up for a Husqvarna account in the
Automower
3. An e-mail is sent to the registered e-mail address.
Follow the instructions in the e-mail in less than 24
hours to validate your account.
4. Log in to your Husqvarna account in the
Automower
3.11.2 To pair Automower
the product
Bluetooth
Connect kit for cellular communication are included in
Automower
1. Do steps 1–3 in
display of the product on page 22 .
2. Use the arrow buttons and the OK button to
® move through the menu structure
Automower
3. Follow the instructions in the Automower
app.
3.12 Product settings with keypad and
display
3.12.1 To get access to the menu in the
display of the product
1. Push the STOP button.
2. Use the number buttons and the OK button to
enter the PIN code.
3. Push the MENU button.
3.12.2 Menu structure
The main menu contains:
• Schedule
Cutting height
•
Security
•
Messages
•
• Weather timer
Installation
•
Settings
•
Accessories
•
Refer to
structure overview 2 on page 8 and Menu structure
overview 3 on page 9 .
® connectivity.
®
Connect app on your
®
Connect app.
®
Connect app.
®
Connect and
®
communication and the Automower
®
430XH/450XH.
To get access to the menu in the
® Connect > Pairing > New pairing .
Menu structure overview 1 on page 7 , Menu
1230 - 004 - 04.03.2022
®
Connect
®
Accessories >
®
Connect