Husqvarna AUTOMOWER 310 Operator's Manual page 25

3.12.4.5 To change the duration of the time lock
1. Do steps 1–3 in To get access to the menu in the
display of the product on page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Duration > Duration of time lock .
3. Use the number buttons to select a time interval of
1–90 days.
4. Push the BACK button.
3.12.5 Messages
In this menu the previous fault and information
messages can be found. For some of the messages,
there are tips and advice to help to rectify the fault.
Troubleshooting on page 37 .
Refer to
If the product is disrupted in any way, for example it is
trapped or the battery is low, a message is saved
relating to the disruption and the time it happened.
If the same message is repeated several times, this may
indicate that an adjustment to the installation or the
product is required. Refer to Installation on page 14 .
3.12.5.1 To read the messages
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
messages and Messages > Info messages .
3. Read the messages and read the
to get information and recommendations to correct
the faults.
3.12.6 Weather timer
Weather timer automatically adjust the cutting time to
the growth of the grass. The product is not permitted to
operate more than the schedule settings.
Note:
Weather timer , it is recommended
When using
to make as much operating time as possible available
Weather timer . Do not restrict the schedule more
for
than necessary.
The first operation of the day is set by the schedule
settings. The product always complete 1 mowing cycle,
and then Weather timer selects if the product will
continue to operate or not.
1440 - 004 - 24.03.2021
Note:
operate for more than 50 hours, or if a
settings is done. Weather timer is not changed if a Reset
of schedule settings is done.
Security > Advanced >
3.12.6.1 To set the Weather timer
1.
2.
3.
4.
3.12.6.2 To set the Weather timer frequency
Set how frequently the product cuts the grass when the
Weather timer is in use. There are 3 frequency levels:
Low, Mid and High . The higher the frequency, the more
sensitive the product is to the grass growth. That is, if
the grass growth is high then the product is allowed to
work longer.
Note:
using
adjusting. Do not restrict the schedule more than
necessary. Also, check that the blade disc is clean and
that the blades are in good condition.
1.
Messages > Fault
2.
Troubleshooting
3.
4.
3.12.7 Installation
In the Installation menu it is possible to adapt the
settings of the product for best mowing result.
3.12.7.1 Lawn Coverage
If the work area includes remote parts that are
connected with narrow passages, the
function is useful to be able to maintain a well-cut lawn
in all parts of the yard. A guide wire must be installed to
use the functions. You can set a maximum of 3 remote
areas.
With the
follows and then leaves the guide wire after a certain
distance and starts to mow the lawn.
Weather timer is reset if the product does not
To get access to the menu in the
Do steps 1–3 in
display of the product on page 23 .
Use the arrow buttons and the OK button to move
Weather timer > Use
through the menu structure
Weather timer .
Push the OK button to select the
Push the BACK button.
If the mowing results are not optimal when
Weather timer , the schedule settings may need
To get access to the menu in the
Do steps 1–3 in
display of the product on page 23 .
Use the arrow buttons and the OK button to move
Weather timer >
through the menu structure
Cutting time .
Use the arrow buttons to select
frequency.
Push the BACK button.
Lawn Coverage function the product first
Reset of all user
Weather timer .
Low, Mid or High
Lawn Coverage
Installation - 25