1.6.4 User's Obligations; Additional Requirements Regarding Qualification; User Positions; Safety Measures During Operation - Optimum OPTimill MB 4 Operating Manual

1.6.4 User's obligations

The user must

have read and understood the operating instructions,

be familiar with all safety devices and regulations and

be able to operate the machine.
1.6.5

Additional requirements regarding qualification

The following additional requirements apply for work on electrical components or equipment:

They must only be performed by a qualified electrician or person working under the instruc-
tions and supervision of a qualified electrician.
Before starting work on electrical parts or operating agents, the following actions must be taken
in the order given:

disconnect all poles,

secure against restarting,

check that there is no voltage.
1.7

User positions

The user position is in front of the drilling-
milling machine.
1.8

Safety measures during operation

CAUTION!
Danger due to inhaling dust and mist that are hazardous to health.
Depending on the materials to be machined and the agents used, dusts and mists can
arise that are detrimental to health.
Ensure that the harmful dust and mist generated are safely sucked off at the point of
origin and routed away from the working area or filtered. To do so, use a suitable
extraction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Extra precautionary measures must be taken before machining flammable materials (e.g. alu-
minium, magnesium) or using combustible agents (e.g. spirit) to avert a health hazard.
EN MB4
12 Translation of original instruction
Img.1-1: User positions
Version 1.1.1 - 2021-1-25