Interval
Where?
First after 200
operating
hours, then
every 2000
operating
hours
Weekly
Every month
EN
MB4
36
What?
How?
For oil change use an appropriate collecting tray of suffi-
cient capacity.
Have the drilling-milling machine run for a few minutes, the
oil will heat up and will slightly penetrate from the opening.
Remove the oil drain plug.
Operating material on page 19
Oil change
Lubricate all oiler cups with machine oil, do not use grease
guns or the like.
Operating material on page 19
Oiler
cup
Oiling
Lubricate all oiler cups with machine oil, do not use grease
guns or the like.
Oiling
Translation of original instruction
Oil drain plug
Gear ventilation/
Filler hole
Abb.5-2: Milling head
Img.5-3: Oiler cup
Version 1.1.1 - 2021-1-25