Inspection And Maintenance - Optimum OPTimill MB 4 Operating Manual

5.2

Inspection and maintenance

The type and level of wear depends to a large extent on the individual usage and operating
conditions. Any indicated intervals therefore are only valid for the corresponding approved con-
ditions.
Interval Where?
Start of work,
after every
maintenance
or repair work
Start of work,
after every
maintenance
or repair work
Every week
Weekly
Version 1.1.1 - 2021-1-25
What? How?
 
Safety check on page 14

Oil all guide rails.
Oiling

Oil all bare steel surfaces. Use an acid-free oil, e.g.
weapon oil or motor oil.
Oiling

Check the oil level of the gear. The oil level must be in the
middle of the sight glass.
Oil level
Translation of original instruction
Oil sight glass
Abb.5-1: Oil sight glass speed gear
MB4 EN
35