Agilent Technologies OmniBER OTN Series Installation Manual page 44

Installation.book Page 41 Monday, January 12, 2004 1:13 PM
Installation Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The example below shows the default Transmitter Settings
page.
Check the laser LED is illuminated at the 9.95/10.71 Gb/s
Output Port on the OmniBER OTN's connector panel.
3 Press <Menu>, choose Tx/Rx > Coupling then press
<Select>. Choose Copy Tx to Rx to set Coupling On. Select
Close to close dialog.
4 Press <Smart Test>, choose Shortcuts > Trouble Scan then
press <Select>. Press Run/Stop to begin a measurement.
Installation (Getting Started)
2
41