Installation.book Page 44 Monday, January 12, 2004 1:13 PM
2
Installation (Getting Started)
44
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
19 Set the Laser to ON and check the laser LED is illuminated at
the connected 52 Mb/s - 2.5 Gb/s output port on the
OmniBER OTN's connector panel.
20 Repeat
step 4
to
step 6
21 Press <Window> key to highlight the Transmitter Settings
page and set the Laser to OFF.
22 Disconnect all loopback connections.
to confirm correct operation.
Installation Manual