Agilent Technologies OmniBER OTN Series Installation Manual page 54

Installation.book Page 51 Monday, January 12, 2004 1:13 PM
2
Installation (Getting Started)
USB Two Universal Serial Bus ports for connecting to a
printer. The printer may be attached after power-on.
Mouse PS/2 port for connecting a mouse.
Keyboard PS/2 port for connecting an external keyboard.
Ensure that keyboard port is used - if connected to mouse PS/2
port in error the instrument will require to be restarted
.
RS232 Remote Control port providing following
configurations:
• Controller Type: Computer and Terminal.
• Handshaking Protocol: None, Xon/Xoff and RTS/CTS.
• Speed: 300, 600, 1200, 1800, 2400, 4800, 9600, 19200,
38400 baud.
• Parity: Odd, Even.
• Stop Bits: 1, 2
• Data Length: 8, 7 bits.
VGA Connector for displaying contents of instrument screen
on an external display. Ensure that the external display is
connected before powering up the instrument.
LAN 10M/100M 10/100 Base-T LAN interface port. Supports
remote control of instrument and the downloading of firmware
upgrades. Note that to ensure compliance with EN 55011 (1991)
a category 5, STP patch lead, RJ45 cable should be used to
connect to the LAN port.
Installation Manual 51
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com