Agilent Technologies OmniBER OTN Series Installation Manual page 19

Installation.book Page 16 Monday, January 12, 2004 1:13 PM
1
Introduction
16
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Other Packaging.
The following general instructions should be
followed when repackaging with commercially available
materials:
• Wrap instrument in heavy paper or plastic. If the instrument
is being shipped to Agilent, attach a tag indicating the type of
service required, return address, model number and full
serial number.
• Use a strong shipping container. A double wall carton made
of 350 pound test material is adequate.
• Use a layer of shock absorbing material 70 to 100 mm (3 to 4
inch) thick, around all sides of the instrument to provide
firm cushioning and prevent movement inside the container.
Protect the Front Panel controls and Top Panel connectors
with cardboard.
• Seal shipping container securely.
• Mark shipping container FRAGILE to ensure careful
handling.
• In any correspondence, refer to instrument by model number
and full serial number.
Weight and Dimensions
Weight J7230B 20.5 kg (45 lb)
Dimensions 300 x 365 x 450 mm (11.75 x 14.5 x 17.75 in)
(height x width x depth)
Installation Manual