Pre-Installation Works - Nice Filo Instructions And Warnings For Installation

ECSBus output
SbS input
Stop input
Radio aerial input
Max. cable length
Ambient operating temperature
Assembly
Protection rating
Dimensions / weight
Possibility of remote control
Memory capacity
ECCO5... transmitter range
Programmable functions
Self-programmed functions

3.4 - PRE-INSTALLATION WORKS

Consult Fig. 3
a standard and customary layout.
01. Observe Fig. 3 to understand how the various devices should be connected to the control unit and which terminals should be used for each con
nection. Only devices adopting the same technology can be connected to the ECSBus
The ECSBus system allows for connecting multiple devices together using,
between one device and the next,
trical conductors .
The connection between the devices can have a " cascade
"mixed
02. Observe Fig. 3 to understand how to position the electrical cables in the environment (it is advisable to draw on paper a similar layout, adapting it
03. Read Table 1
Connection
A Power supply
B
C Radio aerial
D ECSBus Input / Output
E Stop input
F SbS (Step-by-Step) input
* it is possible to use a power cable longer than 30 m, provided that it has a larger gauge (for example, 3 x 2.5 mm
earthing device, near the automation.
** For the ECSBus cables and the Stop and SbS inputs, it is also possible to use a single cable with multiple internal conductors, to group multi
3 – English
One output with maximum load of 10 ECSBus units (1 ECSBus corresponds to the consumption
of a pair of photocells)
For normally open contacts (closing of the contact triggers the Step-by-Step (SbS) command)
Stop command)
m (observe the warnings regarding minimum gauge and type of cables)
-20°C ... +55°C
-
IP44
248 x 216 h 305 mm / 7.5 kg
Using ECCO5... transmitters, the control unit is able to receive one or more of the following
Up to 250 transmitters, if memorised in Mode 1 – 250 keys, if memorised in Mode 2
From 50 to 100 m. This range can vary if there are obstacles or electromagnetic disturbances
Pedestrian opening type selectable in 4 modes
Obstacle detection system motor force, 4 selectable levels
Step-by-Step (SbS) command operation selectable in 4 modes
Self-detection of devices connected to the ECSBus output
Self-detection of the gate length and calculation of the deceleration points
-
star
each cable must not exceed the stated maximum length.
TABLE 1 - Types of electrical cables (see Fig. 3)
Type of cable
3 x 1.5 mm (not supplied)
2
2 x 0.5 mm
2
2 x 0.5 mm
2
2 x 0.5 mm
2
2 x 0.5 mm
2
248 x 216 h 305 mm / 7.5 kg
.
cascade star
Maximum admissible length
30 m *
20 m
20 m **
20 m **
20 m **
-
combined
2
-
.
2
-