Nice Filo Instructions And Warnings For Installation page 13

1
CAUTION Important safety instructions. Observe all the instructions as improper installation may cause serious damage
CAUTION Important safety instructions. It is important to comply with these instructions to ensure personal safety. Store these
instructions
•
guided part. Should it be unsuitable, DO NOT proceed with the installation
•
CAUTION
• Before proceeding with the product' s installation, check that all materials are in good working order and are suitable for the intended applications
• The product is not intended for use by persons (including children) with reduced physical, sensory or mental capacities, nor by anyone lacking suf
• Children must not play with the appliance
•
CAUTION In order to avoid any danger from inadvertent resetting of the thermal cut-o device, this appliance must not be powered through an
external switching device, such as a timer, or connected to a supply that is regularly powered or switched o by the circuit
• Provide a disconnection device (not supplied) in the plant' s mains power supply, with a contact opening distance that ensures complete disconnec
tion under the conditions envisaged by Overvoltage Category III
•
If this should happen, stop installation immediately and contact the Customer Service
• The manufacturer assumes no liability for damage to property, items or persons resulting from non-compliance with the assembly instructions. In
such cases the warranty does not cover material defects
• The weighted sound pressure level of the emission A is lower than 70 dB(A)
• Cleaning and maintenance to be carried out by the user must not be e ected by unsupervised children
• Before intervening on the system (maintenance, cleaning), always disconnect the product from the mains power supply
• Check the system periodically, in particular all cables, springs and supports to detect possible imbalances, signs of wear or damage. Do not use if
repairs or adjustments are necessary, because a failure with the installation or an incorrectly balanced automated system may lead to injury
• The packaging materials of the product must be disposed of in compliance with local regulations
• from the gate when it is moved through the control elements
• When performing a manoeuvre, keep an eye on the automated mechanism and keep all bystanders at a safe distance until the movement has been
completed
•
• Prior to installing the drive motor, check that all mechanical components are in good working order and properly balanced, and that the
moves correctly
• If the gate being automated has a pedestrian door, the system must include a control device inhibiting the operation of the motor when the pedestrian
door is open
• Make sure that the controls are kept at a safe distance from moving parts, while allowing a good view of these.
Unless a selector is used, the controls should be installed at least 1.5 m from the ground and must not be accessible
•
ments
•
•
• After installing the drive motor, make sure that the mechanism, protective system and all manual manoeuvres operate properly
1 – English
INSTALLATION PRECAUTIONS
-
-
automation
-